Changing The Status Of Paths To Offline(C) - Hitachi XP P9500 User Manual
Command suite for linux(r)
Hide thumbs
Also See for XP P9500:
- User manual (746 pages) ,
- User manual (422 pages) ,
- User manual (574 pages)
Table of Contents
Advertisement
KAPL01057-I All the paths which pass the specified HBA will be
changed to the Online status. Is this OK? [y/n]:y
KAPL01061-I 3 path(s) were successfully placed Online; 0 path(s)
were not. Operation name = online
#
3
Check to see if the statuses of all the applicable paths have changed.
.
The following is an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
Changing the Status of Paths to Offline(C)
To change the status of paths to Offline(C):
1
Check the current status of the paths.
.
To change the status of a path to Offline(C) by specifying an HBA port,
CHA port, or single path check the path name or PATH_ID used to
manage the path.
The following is an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
To place a path Offline(C) by specifying a SCSI device name, check the
SCSI device name of the path.
The following shows an example of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
2
To change the status of paths to Offline(C), execute the dlnkmgr
.
command's offline operation.
The paths to be placed Offline(C) can be specified by using an HBA
port, CHA port, or single path. Instead of specifying a path, you can also
specify a SCSI device name. For details on how to specify paths, see
offline (Places Paths Offline) on page
For example, if you want to place all the paths that pass through a
specific HBA port offline, execute the dlnkmgr command's offline
operation with the -hba parameter specified. The following is an example
of executing the command:
# /opt/DynamicLinkManager/bin/dlnkmgr offline -hba 0010.0000
KAPL01055-I All the paths which pass the specified HBA port will
be changed to the Offline(C) status. Is this OK? [y/n]:y
KAPL01056-I If you are sure that there would be no problem when
all the paths which pass the specified HBA are placed in the
Offline(C) status, enter y.
KAPL01061-I 3 path(s) were successfully placed Offline(C); 0
path(s) were not. Operation name = offline
#
3
Check to see if the statuses of all the applicable paths have changed.
.
4-12
HDLM Operation
Hitachi Dynamic Link Manager User Guide (for Linux(R))
6-5.
Otherwise, enter n. [y/n]:y
Advertisement
Table of Contents
Troubleshooting
