Hitachi XP P9500 User Manual page 570

Message ID
KAPL12328-I
KAPL12329-I
KAPL12330-I
KAPL12331-E
8-110
Message Text
Execution of linuxrc
completed.
The utility for supporting the
boot disk started.
The utility for supporting the
boot disk completed.
A directory with the specified
kernel version does not exist.
Directory name = aa...aa
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
page 3-124 or
Installation in an Environment
Where a Logical Volume (LVM2)
on an HDLM Device Is Used as a
Boot Disk on page
- filter
- types
- md_component_detection
In the case of /etc/opt/
DynamicLinkManager/
dlmmkinitrd.conf file
Install an HBA driver, which is
supported as a boot disk by
HDLM.
Or use an HBA, which is
supported as a boot disk by
HDLM.
In the case of /etc/sysconfig/
kernel file
The OS environment is incorrect.
Add the names of the HBA
drivers that have to be included
in the initial RAM disk image into
the INITRD_MODULES= line of
the /etc/sysconfig/kernel file.
Details
Execution of linuxrc completed.
Action
None.
Action
None.
Action
None.
Details
aa...aa: The directory where the
kernel module is stored
For Red Hat Enterprise Linux AS4/
ES4 or Red Hat Enterprise Linux 5:
The name following /lib/
modules/ directory is the kernel
version specified with the
parameter.
For SUSE LINUX Enterprise Server:
The name following /lib/
modules/ directory is a kernel
version which the dlmmkinitrd
utility for supporting the boot
disk has recognized.
Upgrade
3-135: