Hitachi XP P9500 User Manual page 471

Message ID
KAPL01050-I The currently selected paths will
be changed to the Online status.
Is this OK? [y/n]:
KAPL01051-I Because no path has been
selected among the currently
displayed paths, the paths in
the Offline(C), Offline(E), and
Online(E) statuses will be
changed to the Online status. Is
this OK? [y/n]:
KAPL01052-I The currently selected paths will
be changed to the Offline(C)
status. Is this OK? [y/n]:
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Message Text
Messages
Explanation
Action
If you want to execute the
operation, enter y. If you want to
terminate processing, enter n. For
details on the clear operation,
see clear (Returns the Path
Statistics to the Initial Value) on
page 6-3. For details on the set
operation, see set (Sets Up the
Operating Environment) on page
6-14.
Details
The online operation will be
started. To continue the online
operation, enter y. To cancel the
operation, enter n.
Action
If you want to execute online
processing, enter y. If you want to
terminate processing, enter n. For
details on the online operation,
see online (Places Paths Online)
on page 6-10.
Details
All the paths will be placed Online
because the path selection
parameter is not specified for the
online operation. To place all the
paths Online, enter y. To cancel
the operation, enter n.
Action
If you want to execute online
processing, enter y. If you want to
terminate processing, enter n.
Before you execute the
processing, be sure to execute the
view operation of the HDLM
command (dlnkmgr) to check the
path status. For details on the
view operation, see
(Displays Information) on page
6-28. For details on the online
operation, see online (Places
Paths Online) on page
Details
The offline operation will be
started. To continue the offline
operation, enter y. To cancel the
operation, enter n.
Action
view
6-10.
8-11