View Menu; Toolbar; Table Bar; Site Bar - Motorola MOSCAD 68P02958C00-B User Manual

Dialog box parameters and functions
Reserved Line
The row in the Site table where the default center will be defined.
Site ID
The Site ID for the site being defined as the default center. (Note: The Site ID was defined for
the site in its site configuration.)
Retries
The number of attempts to be made to communicate with a non-responding site.
Time-out
The time (in seconds) to wait between communication retries.
Primary Link ID
The link through which the site is connected to the network.
Primary Link Validity
The Gateway tests communication with the sites on a regular basis. If a site has not responded
for a specific time interval, the link is considered unreachable.
Secondary Link ID
The link (other than the Primary) through which the RTU is connected to the network from the
list box.
Secondary Link Validity
The Gateway tests communication with the sites on a regular basis. If a site has not responded
for a specific time interval, the link is considered unreachable.

View Menu

The following views are available to the user. Click on an entry to select it, and a check mark
will appear on the menu. The associated view is then displayed on the Site Table window.

Toolbar

The Toolbar displays the icons described under Icons.

Table bar

The Table bar displays, at the top of the Site Table window, the commands used to manipulate
the Site Table cells.

Site bar

The Site bar displays the Site ID/Link ID at the top of the Site Table window and enables the
user to define the site (local/remote) to which it will download the Site table.

Status bar

The Status bar displays the status messages at the bottom of the Site Table window.
5-91
Site Table