Close; Save; Save As - Motorola MOSCAD 68P02958C00-B User Manual

Look in
If the currently displayed directory is not the correct one, double-click the arrow to the
right of the Look in parameter and locate the drive/directory. To access sub-directories,
double-click parent directories.
File Name
Type the name of the dial up file. ToolBox automatically adds the .tel extension.
Alternatively, locate the file name in the file list, and double-click the name.
Files of Type
This box shows the type (extension) of the files currently displayed in the File Name list. If
the displayed file type "filter" is not .tel, open the drop-down list and select the .tel type.
After loading the file, you can edit existing data by direct typing or using the Edit menu
command, or add new telephone numbers.

Close

The Close command closes an existing file.

Save

The Save command stores the current phone book.
If the file has not been saved at least once, ToolBox opens the Save As dialog box where
you assign a name to the phone book file.
If the file has been saved at least once, ToolBox just saves the file.

Save As

The Save As command saves the current phone book under a different file name.
Generally, you'll use this command when you want to create a phone book file that is
slightly different from an existing one (load the existing file, save it under a new name, and
make the changes).
The command opens the dialog box shown below. This dialog appears also when you
request to save a phone book file for the first time.
5-132
Phone Book