Delete Ports - Motorola MOSCAD 68P02958C00-B User Manual

Site Configuration
Description
Same as the source port. Can be modified.
Toolbox copies the new ports after the insertion point. The copied ports are identical to the
source port, except for the TCP Port ID and Link ID.

Delete Ports

Use the Delete Ports button to delete one or more of the Terminal Server Ports.
Select the Terminal Server Port to be deleted from the Terminal Server Ports screen and click
the Delete Ports button.
To select successive Terminal Server Ports, click the first Terminal Server Port address and
press the SHIFT key while you click the last Terminal Server Port address, or click-hold-and-
drag.
To delete all ports, defined under the Terminal Server node, select Delete from the right-click
menu on the Terminal Server. All servers will be deleted.
User Parameters for Terminal Server Port 1
A description of the User parameters follows.
Terminal Server IP address
This column displays the 32-bit IP address parameter of the Terminal Server connected to the
current port.
Range: 000.000.000.001-255.255.255.254
TCP ID of Port
This column displays the TCP Port ID of the current port.
Link Name
This column displays the Link Name (ID) of the current port.
Description
This column is used to enter free format text in user application terminology.
Advanced Physical Parameters for Terminal Server Port 1
For a description of the Advanced Physical parameters, see Physical Parameters for DataTAC
Port 1 above.
Advanced Link Parameters for Terminal Server Port 1
For a description of the Advanced Link parameters, see Link Layer Parameters for DataTAC
Port 1 above.
5-38