Motorola MOSCAD 68P02958C00-B User Manual page 429

Error #141: Can not find Link ID in network configuration, network layer: %% Dest Site: %%,
Dest Link: %%, Dest Port: %%
The network layer in a RTU is asked to transfer a communication buffer to the
Dest Site, Dest Link & Dest port but there is no route defined in the network
configuration, which the communication can be transferred through.
Error #142: Destination=Default Central, Network layer: %%, Dest Site: %%, Dest Link:
%%, Dest Port: %%
Network is trying to transfer a buffer to Default central before the last one
communicate with the transmitting site at least once.
Error #144: Transparent Network layer !! Can not route via other Link ID network layer: %%
For system software developers only. Consult product group.
Error #145: Formatted buffer is smaller than the received frame,
network layer: %%
May indicate system software error. Consult product group.
Error #160: Timer service is not activated since timer is defined with 0 time units, device:
%%
The data of the timers device is corrupted. Trying to operate a timers routine
with no time units.
Error #161: # of time units passed without activating timer service is %%, device: %%
The timers task can not start its operation in a time interval which is bigger than
the time interval that was allocated for it in the device creation. This message
may indicate either a long scan time (above 500 msec) or an infinite loop in the
user application.
Error #170: Illegal data in constant cyclic buffer structure
May indicate system software error. Consult product group.
Error #171: Illegal data in variable cyclic buffer structure
May indicate system software error. Consult product group.
Error #180: Illegal setting of date & time:
Seconds: %%
Day : %%
The date and time settings are not correct. This message appears when the user
application updates the time and date and one or more of the settings is
incorrect.
Minutes: %% Hours: %%
Date : %% Month: %%
C-137
Error Messages
Year: %%