Motorola MOSCAD 68P02958C00-B User Manual page 93

Site Configuration
Link ID
The Link ID defaults to the next available Link ID.
Description
Defaults to a blank field. You may enter an up to 40-character port description.
Copy One Port
Use the Copy One Port button to create a new Terminal Server Port with the same
properties to belong to the same group of Terminal Server IP addresses as the existing Port and
to retain the same Advanced Parameters as the existing Terminal Server Port.
From the Terminal Server Ports screen, select an existing port with properties similar to the
one you want to create. Click Copy One Port.
Toolbox copies the new port after the insertion point. The copied Port is identical to the source
Port, except for the TCP Port ID and Link ID. To save the changes, click on OK or Apply. A
new Terminal Server Port item will appear in the workspace under the Terminal Server item.
User, advanced physical layer and advanced link layer parameters can be set for the new port.
Terminal Server IP address
Same as the source port.
TCP Port ID
The TCP Port ID is not copied since Toolbox automatically assigns the next available TCP
Port ID.
Link ID
The Link ID is not copied since Toolbox automatically assigns the next available Link ID.
Description
Same as the source port. Can be modified.
Copy Group of Ports
Use the Copy Group of Ports button to create a new Terminal Server Port with the same
properties (belong to the same group of IP addresses (Terminal Server) as the existing Port and
to retain the same Advanced Parameters) as the existing Terminal Server Port. From the
Terminal Server Ports screen select an existing port with properties similar to the one you
want to create. Click Copy Group of Ports. The following screen appears:
5-36