Icons; File Menu - Motorola MOSCAD 68P02958C00-B User Manual

When the Software Diagnostics tool is activated from the ToolBox, the diagnostics
information is appended to the log file, and the site's log file is then cleared. (This is
important as the size of the site's log is limited.) The log file in the ToolBox, however, is not
cleared, and it is recommended that the file be cleaned out manually from time to time.

Icons

The following command icons are available in the toolbar. Those icons which are specific to a
given logger, are marked accordingly below. Note that during execution, the icons displayed
in the toolbars relate to the active tool.
Icon Corresponding menu command
File menu, New command
File menu, Open command
File menu, Save command
Edit menu, Cut command
Edit menu, Copy command
Edit menu, Paste command
File menu, Print command
Help menu, About command
Loggers menu, Error Logger command
Loggers menu, Diagnostics command
Loggers menu, Start command
Loggers menu, Device list command (SW Diagnostics only)
Loggers menu, Abort command

File Menu

The File menu commands enable you to save logger information to a file and to carry out file
operations. Those commands which are specific to a given logger, are marked accordingly
below.
5-162
SW Diagnostics & Loggers