Port 3 - Motorola MOSCAD 68P02958C00-B User Manual

Advanced Physical and Link Layer Parameters for Port 2
When one of the advanced parameters windows is displayed, you can use the following
functions:
After changing a parameter, you can restore all changes to their default, by clicking the
Default
Modified parameters appear against red background the next time you access the
parameter list.
For more details, see Advanced Parameters in this chapter.

Port 3

Port 3 is a plug-in port designed for various radio or line communications, for example:
Radio
Line
RS-232
Microwave
Not used
For details on the selection method and options, see Port 2.
Port Type for Port 3
For details on the selection method, options, and possible combinations, see Port 2. The
following is a description of the additional combinations that apply to Port 3 and Port 4 only.
Radio, Conventional, radio type, max. number of repeaters, modem
Direct FM modulation for conventional radio. For all parameters that appear italicized above,
open the drop-down list and select the corresponding value. If you cannot find the requested
value on the list (like a radio type), select the "General" parameter (for example, General
Radio).
Radio, Trunking, radio type, trunk system, modem
Trunked radio. For all parameters that appear italicized above, open the drop-down list and
select the corresponding value. If you cannot find the requested value on the list (like a radio
type or trunk system), select the "General" parameter (for example, General Radio).
Line, Multi-Drop Half-Duplex
For multi-drop half-duplex wire line communication, using the Line Modem board.
Line, Full Duplex (2w/4w), Sync
For full-duplex (2w/4w), synchronous wire line communication, using the Line Modem board.
Line, Full Duplex (2w/4w), Async
For full-duplex (2w/4w), asynchronous wire line communication, using the Line Modem
board.
Line, Dial-up, Async
For asynchronous wire line communication using the dial-up Line Modem board.
icon.
5-21
Site Configuration