Motorola MOSCAD 68P02958C00-B User Manual page 112

'C' application parameters
Number of user tasks for 'C' blocks <0-10>
In addition to the 5 tasks defined by the system (main process, Task priority A...Task priority
D), up to 10 additional tasks can be defined. These tasks can be activated via a user-defined C
function which can be called with ucall. The tasks can be activated or suspended using a C
routine. Each task allocates 2KB of stack. For details consult the C Toolkit.
Number of named pointers <0-100>
It is possible to execute MOSCAD_malloc from a 'C' block, to hold the allocated buffer in
named pointers between downloads (access function from "C" Toolkit), and to get it back
after the download ends. This feature enables you to keep data between different downloads.
Number of slave 'C' functions for session based protocol <0-255> [0]:
Number of 'C' language functions to be supplied by the 'C' application for session based
protocol.
Number of 'C' functions called by the 10 ms task <0-255>
Number of 'C' language functions to be supplied by the 'C' application to the 10 millisecond
task.
Number of 'C' functions called by the 100 ms task <0-255>
Number of 'C' language functions to be supplied by the 'C' application to the 100 millisecond
task.
Number of 'C' functions called by the 1 sec task <0-255>
Number of 'C' language functions to be supplied by the 'C' application to the 1 second task.
Number of 'C' functions called by the 1 min task <0-255>
Number of 'C' language functions to be supplied by the 'C' application to the 1 minute task.
Number of diagnostics functions for 'C' application <0-255>
Number of 'C' language functions to be supplied by the 'C' application to the Software
Diagnostic utility.
Size of each buffer in the 'C' application heap<0-2048>
Maximum buffer size in the heap used by the 'C' application.
Number of buffers in the 'C' application heap <0-255>
Maximum number of buffers in the heap used by the 'C' application.
Size of dynamic DB access functions table <0-255>
Number of 'C' language functions to be supplied by the 'C' application to the DB map.
Size of Log Flash function table <0-255>
Number of callback functions to be supplied by the 'C' application for logging flash
operations. The first entry in the table will always contain the Program callback function, the
5-55
Site Configuration
[0]:
[1]:
[0]:
[0]:
[0]:
[0]:
[0]:
[0]:
[0]:
[0]:
[0]: