Configuration - Motorola MOSCAD 68P02958C00-B User Manual

MOSCAD
8 Pin Connector
RJ 45 Connector
1 (TXD)
2 (RXD)
3 (CTS)
4 (GND)
5 (CD)
6 (RTS)
(*) 7 (12V)
8 (DTR)

Configuration

General notes:
The commands to be entered were given under the assumption that the ELS16 is
performing a 'self boot'. In case of a boot server, please refer to EQUINOX
documentation.
Commands can be typed in lower case or in upper case letters.
After each command, press the <Return>key. If the command was entered legally, then
ELS16 prompts: "Local>"
N represents a port number. It can be any number in the range of 1 to16
t represents a value in seconds between 10 and 180
a and m represents a number in the range of 0..255
SOCKET_NUMBER represent a TCP socket. Each port must have a deferent TCP
socket number, which must be greater than 2001 or equal.
SERVICE_NAME is a string given to a service as its' name.
The first command to be entered will allow the user access to EQUINOX configuration.
The default password is SYSTEM.
After attaching a console terminal (usually at port 1), type in the following commands.
SET PRIV < return>
SYSTEM <return>
EQUINOX
8 Pin Connector
RJ 45 connector
6 (RxD)
4 (TxD)
7 (DTR)
3 (GND)
8 (RTS)
2 (DCD)
N.C
1 (CTS)
6-10
Adding Terminal Server Ports