3. H-W parameters address.
4. Working mode of the channel (synchronous, asynchronous, DTE, DCE).
5. Communication baud rate.
6. Not relevant.
7. Port number.
8. Configuration mode.
9. Channel access semaphore.
10. MTE signal on events that took place.
11. Whether FSK, DPSK or FSK.
12. The address to which this site will respond through this port.
13. Actual channel access timers.
14. Preset timers for fields defined in the advanced parameters of Port 3.
MODEM CHANNEL
## 360
Modem hardware/software last status :-
Internal software data (key)
Internal hardware registers
Internal hardware parameters
Current channel port
Channel status mode
Channel driver lock
Channel signals
Channel access type
Channel driver type
Channel control register
Channel direction register
Channel data register
Current reception empty buffers
Current reception ready buffers
Current transmission ready buffers
Current transmission empty buffers
1. Device-key address.
2. H-W registers address.
3. H-W parameters address.
4. Port number.
5. Configuration mode.
(DATA)
: %% 1
(IREG)
: %% 2
(IRAM)
: %% 3
(CHAN_PORT)
: %% 4
(CHAN_MODE)
: %% 5
(CHAN_LOCK)
: %% 6
(CHAN_SIGNAL): %% 7
(CHAN_ACCESS): %%
(CHAN_TYPE)
: %% 8
(PBCNT)
: %% 9
(PBDDR)
: %% 10
(PBDAT)
: %% 11
: %% 12
: %% 13
: %% 14
: %% 15
C-50
Software Diagnostics Output