Motorola MOSCAD 68P02958C00-B User Manual page 47

Hardware Installation
(2) RX LED of Port 4 is on: ROM test has failed.
(3) CM and RX LEDs are on: FLASH memory test has failed.
(4) TX4 LED is on: Create software module has failed.
(5) CM4 and TX3 LEDs are on: Real time clock has failed.
(6) RX3 and TX3 LEDs are on: Internal clock has failed.
(7) CM3, RX3, and TX3 LEDs are on: Hardware breakpoint has failed.
(8) MON LED is on: XTAL rate change has failed.
(9) CM3 and MON LEDs are on: User request has failed.
(10) RX3, CM3, and MON LEDs are on: The current site configuration was downloaded
by a previous version of the Programming Toolbox.
(11) TX and CM LEDs of Port 4 are on: Creating of Heap failed.
3-12