Open - Motorola MOSCAD 68P02958C00-B User Manual

Site Configuration

Open

The Open command (Site Configuration, File menu) opens an existing site configuration file.
After the command is activated, the ToolBox displays the Open dialog box, as shown below.
Initially, the Open dialog box defaults to the config sub-directory of the ToolBox directory
(e.g., C:\Itbox550\config), where the ToolBox stores configuration files by default. After the
first execution of the Site Configuration utility, the Open dialog box defaults to the directory
of the last opened configuration file.
Select the configuration file (see parameters below) and click OK to load it.
Dialog box parameters
Use the parameters in the order specified below.
Look in
If the currently displayed directory is not the correct one, open the Look in list and locate the
directory. To access sub-directories, double-click parent directories.
File Name
Type the name of the configuration file. Site Configuration automatically adds the extension.
Alternatively, locate the file name in the file list, and double-click the name.
Files of Type
This box shows the type (extension) of the files currently displayed in the File Name list.
There are three file types in the drop-down list: Workspace (.ifw), Project (.ifp), and Config
File (.cfg).
5-9