Section 6. Change/View Menu Functions; Introduction To Section; Change View Menu - Motorola MT 2000 User Manual

MTSX RSS

SECTION 6. CHANGE/VIEW MENU FUNCTIONS

6.1 INTRODUCTION TO SECTION

This section describes all the functions available from the CHANGE/VIEW MENU. To guide you through these
functions, the following CHANGE/VIEW-related menus and screens are shown with their specific RSS location,
programming procedures from the MAIN MENU, function key descriptions, and field definitions.
All functions (supported and unsupported) will be displayed in the menu's working area. The unsupported functions
(based on the radio's model or options) will NOT be displayed in the F-key ID area.
6.2 CHANGE/VIEW MENU
RSS LOCATION:
MOTOROLA Radio Service Software
MTSX
MAIN:CHANGE/VIEW
F1 F2
HELP
The CHANGE/VIEW MENU is a multi-level menu that is used to view or modify codeplug features and option
configurations. All codeplug parameters are classified as either Radio Configuration, Conventional, or Trunking.
The CHANGE/VIEW MENU functions permit access to each category. Unlike the SERVICE MENU functions, a
codeplug must be loaded into your computer's memory (via the GET/SAVE/PROGRAM MENU functions) before
you can access the CHANGE/VIEW screens. You may change or view an archive file without a radio connected.
If your radio model does not contain a specific feature, you will not be permitted access to the corresponding data
field or screen for that feature. Refer to you radio catalog sheets or radio service manual for radio model descriptions
and features.
68P81074C50
At the MAIN MENU, press
Model:
CHANGE/VIEW MENU
F1 - HELP
F2 -
F3 - Radio Wide Buttons, Switches, Display, Scan, Phone
F4 - Trunking Systems, Personalities, Call Lists, Options
F5 -
F6 - Conventional Systems, Personalities , MDC, Options
F7 -
F8 - Zone/Channel Assignment
F9 -
F10 - EXIT, Return to Main Menu
F3 F4
RADIO TRUNK
CONFIG DATA
NOTE
F4
.
Select Function F1 - F10
F5 F6 F7
CONV
DATA
NOTE
CHANGE/VIEW
F8 F9 F10
ZONE/CHN EXIT
ASSIGN
6-1