Radio Channel (Rad1C , Rad2C - Motorola MOSCAD 68P02958C00-B User Manual

4. The number of times a break signal (end of reception) was received at the port.

RADIO CHANNEL (RAD1C , RAD2C,...)

## 300 LEVEL = 0
Radio hardware/software last status :-
Internal software data (key)
Internal hardware registers
Internal hardware parameters
Current channel port
Channel status mode
Channel driver lock
Channel signals
Channel access type
Channel driver type
Channel control register
Channel direction register
Channel data register
Current reception empty buffers
Current reception ready buffer
Current transmission ready buffers
Current transmission empty buffers
1. Device-key address.
2. H-W registers address.
3. H-W parameters address.
4. Port number.
5. Configuration mode.
6. Channel access semaphore.
7. MTE signal on events that took place.
8. Whether FSK, DPSK or FSK.
9. Defines the functionality of port B in 68xxx (68000 family).
10. Determines whether the pin is for input or output.
11. Defines the value of the pin (previous parameter).
12. Number of empty Rx descriptors.
13. Number of busy Rx descriptors.
14. Number of busy Tx descriptors.
15. Number of empty Tx descriptors.
(DATA) : %% 1
(IREG) : %% 2
(IRAM) : %% 3
(CHAN_PORT) : %% 4
(CHAN_MODE) : %% 5
(CHAN_LOCK) : %% 6
(CHAN_SIGNAL): %% 7
(CHAN_ACCESS): %%
(CHAN_TYPE) : %% 8
(PBCNT) : %% 9
(PBDDR) : %% 10
(PBDAT) : %% 11
: %% 12
: %% 13
: %% 14
: %% 15
C-38
Software Diagnostics Output