Error Messages; Error Logger Messages - Motorola MOSCAD 68P02958C00-B User Manual

Error Messages

Error Logger Messages

This section lists the errors and warnings which may be generated by the Error Logger. The messages
are listed as they appear on the screen, with %% signs in the text to represent alphanumeric values
provided by the Error Logger.
The description which follows the error messages, provides one or more possible causes for the error and
possible solutions.
Error #20:
Error #21:
Error #22:
Error #23:
Error #24:
Error #25:
Error #40:
Invalid Box in TX Queue – Device: %%
This message appears due to a fault memory overwrite in the Tx Queue in the
link layer. The 'Device' is the name of the link layer (referring to the port).
Consult product group.
Invalid Box in Positive ACK Queue – Device: %%
This message appears due to a fault memory overwrite in the ACK Queue in the
link layer. The 'Device' is the name of the link layer (referring to the port).
Consult product group.
Invalid Box in Busy/Setcall Queue – Device: %%
This message appears due to a fault memory overwrite in the Busy/Setcall
Queue in the link layer. The 'Device' is the name of the link layer (referring to
the port). Consult product group.
Can Not Get a New ACK Buffer, increase # of ACK Buffers – Device %%
For each link layer, 8 acknowledge buffers are defined. If all those buffers are
full and the link intends to prepare another acknowledgment for transmission,
this message is displayed and there will be a retry on behalf of the transmitting
side. Usually, this may occur in Nodes. Consult product group.
ACk Buffer (Formatted) is too Small – Device: %%
For system software developers only. Consult product group.
Can Not Get a New ACK Buffer, ACKs Buffer was corrupted – Device: %%
This message appears due to a memory overwrite in the heap of the
acknowledgments in the link layer.
Illegal Operation Code For Configuration
Illegal operation code during configuration download.
C-133