Downloading System Software - Motorola MOSCAD 68P02958C00-B User Manual

desired session(s). A new entry of the appropriate type will be created (e.g. Site
Configuration).
Once a file type entry has been created for the session, the filename listed (e.g.
C:\Itbox550\Config\conf1.cfg) can be edited or erased. If you decide not to download a file
of that type, you can delete the file type entry, by right-clicking on the entry and selecting
Delete or by single-clicking on the entry and pressing the Delete button on the keyboard.
You will be prompted as follows:
If a new Site Configuration is being downloaded, a new Site ID must be defined.
Specifying system software files to be downloaded:
To select a system software kernel file to be downloaded, select Open System File from the
File menu. The utility will default to the C:\Itbox550\system directory. You can also select
another directory. Select the desired .krl file. The downloader session will automatically
be renamed System Downloader Session with the following parameters:
Product Type
IP Gateway. (This field cannot be edited.)
System File Path
The full pathname of the kernel (.krl) file selected. (This field cannot be edited.)
Communication Port
Select the PC communication port to be used for the download to the IP Gateway (COM1-
COM9).
Data Speed
Select the data speed to be used for the download to the IP Gateway (1200-115200).
Drive
Select a directory containing files to be downloaded to the IP Gateway. The default directory
is the ToolBox home (Itbox550). Click on the arrow to browse through other
drives/directories on the computer.
File Type
Select a file type to identify files to be downloaded to the IP Gateway.

Downloading system software

Downloading system software requires a separate download session. Before downloading new
system software, make sure the communication driver is not running on the port to be used for
the download. (For example, if the driver is running on COM1, either download on COM2 or
5-105
Downloader