Table of Contents
Advertisement
Error #257:
Some Failure In Module %%.
Faulty FIFO communication in the specified module.
Error #258:
CLOCK fail flag in module %% is on.
The clock in the specified module is faulty.
Error #259:
I/O module: %% EE memory problem.
All the channels are calibrated, but the inner EE is problematic.
Error #260:
Analog input module: %% FIFO time-out.
The Analog Input module does not respond to the RTU CPU.
Error #261:
Mixed I/O module: %% analog input problem
There is a problem in the specified analog input of the Mixed I/O module.
Error #262:
I/O Module: %% analog output not calibrated.
The specified analog input of the Mixed I/O module is not calibrated.
Error #263:
I/O module: %% analog input calib. succeeded with borderline input.
Calibration succeeded but one of the measurements is out of range.
Error #264:
DI FAIL In Module %%.
The specified module (DI or Mixed I/O) is in FAIL.
Error #265:
AI FAIL In Module %%.
The AI module is in FAIL.
Error #266:
Relay Check Back (CB) FAIL In Module %%.
Incompatibility between desired and actual status in DSP outputs.
Error #267:
Module %%, Scale Factor or Threshold Changed From User Requested Value.
Incompatibility between desired and actual status in AO.
Error #268:
Module %%, DSP Not Ready.
The AC Analyzer module does not respond due to hardware or software
problems. Consult product group.
Error #269:
Module %%, DSP Reset.
The AC Analyzer module has reset itself. Hardware or software problems.
Consult product group.
C-141
Error Messages
- Quick Links:
- Table of Contents
- Introduction
- Moscad Rtu
Hide quick links:
Advertisement
Table of Contents
