File Menu; New; Open; Close - Motorola MOSCAD 68P02958C00-B User Manual

File Menu

The commands in the File menu are designed mainly for manipulating files and exiting the
application. File menu commands are:

New

Creates a new configuration, based on the default settings. The ToolBox gives the new
configuration a temporary name (NEW1, NEW2, etc.), until you save it under a different
name.

Open

Opens an existing link configuration file. After activating this command, the ToolBox
displays the Open dialog box as shown below. The Open dialog box defaults to the config
sub-directory of the IP Gateway ToolBox (Itbox550) directory. The config sub-directory is
where the ToolBox stores configuration files by default.
Enter the desired link configuration file name and click OK to load it.
The ToolBox automatically adds the .txt extension. Alternatively, locate the file name in the
file list, and double-click the name, then click OK.

Close

Closes the currently open link configuration file.

Save

Saves the current configuration file with the name, location, and file format you previously set
in the Save As dialog box.
5-76
MDLC Links Configurator