Motorola MOSCAD 68P02958C00-B User Manual page 426

Error #41: Low Byte Error When Using Flash Memory
This message appears during configuration download, while downloading the
flash. There is a problem in the flash.
Error #42: High Byte Error When Using Flash Memory
This message appears during configuration download, while downloading the
flash. There is a problem in the flash.
Error #43: Given address is not start address of flash memory
This message appears during configuration download, while downloading the
flash. This message indicates a software error in the Download program.
Error #44: Wrong number of bytes in flash memory
This message appears during configuration download, while downloading the
flash.
Error #45: Error After Send Struct
Communication problem during configuration download.
Error #46: Error After Get Struct
Communication problem during configuration download.
Error #47: Control error !!
May indicate system software error. Consult product group.
Error #60: Can Not Remove Slice – Device: %% , Size: %%
This message appears when receiving a MDLC communication buffer, that
passed a CRC check, but one of the communication layers ('Device') can not
understand its contents (due to a bug or a unique case of an illegal buffer
receive). This buffer will be dumped into the heap.
Error #61: Can Not Get Slice – Device: %% , Size: %%
For system software developers only. Consult product group.
Error #62: Can Not Push Block – Device: %% , Length: %%
For system software developers only. Consult product group.
Error #80: Fixed transaction Index (%%) is Out Of Range
This message indicates that a fixed transaction that can not be found in the
transaction table was received. It is an illegal transaction.
C-134
Error Messages