Table of Contents
Advertisement
Error #908:
PLC Switcher module, Function %%
Cannot get the PIN Table !
May indicate system software problem. Consult product group.
Error #909:
PLC Switcher module, Function %%
Cannot find the key of a PLC port software from logical port i.d.!
May indicate system software problem. Consult product group.
Error #910:
PLC Switcher module, Function %%
Cannot find in switcher port table the key of PLC%% connected to %%
PLC table,site table or third party protocol port definition problem.
Error #911:
PLC Switcher module, Function %%
Pull Buffer from Head LIST Failed, although the list is not empty !!
May indicate system software problem. Consult product group.
Error #912:
PLC Switcher module, Function %%
Push Buffer to Head LIST Failed.
Fatal !! The Head List is corrupted !
May indicate system software problem. Consult product group.
Error #913:
PLC Switcher module, Function %%
Push Buffer to Head LIST Failed. Too many buffers in the head list!
The buffer was freed !!
May indicate system software problem. Consult product group.
Error #930:
MODBUSTM module, Function %%
Illegal state !!
May indicate system software problem. Consult product group.
Error #931:
MODBUSTM module, Function %%
Not enough RAM memory for MODBUS load module connected to MASTER !!
May indicate system software problem. Consult product group.
Error #932:
MODBUSTM module, Function %%
Received the reply not in expected format
Timeout problems or system software problem. Consult product group.
Error #933:
MODBUSTM module, Function %%
The size of MODBUS format reply is too large or too small
The master should not send frames or poll for frames longer than 140 bytes.
C-157
Error Messages
- Quick Links:
- Table of Contents
- Introduction
- Moscad Rtu
Hide quick links:
Advertisement
Table of Contents
