Motorola MOSCAD 68P02958C00-B User Manual page 457

Error #1109: Attempt To Use Slave With No Entry in Site table – %%
RTU defined as Master can not operate without Site table.
Error #1110: Self Site ID is not defined in X.25 Addresses Table. Please add it to your
Addresses Table.
Modify X.25 Addresses Table.
Error #1111: Call Request Aborted - UnKnown Site ID: %%
Check X.25 Addresses Table.
Error #1112: Call Request Aborted - UnKnown X.25 address: %%
Check X.25 Addresses Table.
Error #1113: Invalid Convert table X.25 address <--> site
Check X.25 Addresses Table.
Error #1150: Bad Primitive – Msg Id: %% Child Id: %% Msg Type: %% Child State: %%
The operation does not match the status table.
X25 MSG TYPE :
0xc000
0x8001
0xc002
0x8004
0x8005
0x8006
0x8007
0xc009
LAPB MSG TYPE :
0xc000
0x8001
0xc002
X25 STATE :
0 Ready
1 Waiting for peer
2 Waiting for upper
3 Call collision
4 Clear request by peer
LAPB STATE :
0 Disconnected
1 Awaiting for establish
2 Awaiting for disconnect
Operation does not exist in states table of X25/LAPB.
Error #1151: Invalid ID – Msg Id: %% Msg Type: %%
Illegal X25/LAPB channel ID.
May indicate system software problem. Consult product group.
Transmit request
Received packet
Timeout
Establish indication (L2)
Establich confirmation (L2) 0xc00e Interrupt response
Disconnect indication (L2)
Disconnect confirmation
Call request
Transmit request
Receive frame
Timeout
5
6
7
8
3 Established (connected)
4
5
C-165
0xc00a Call response
0xc00b Clear request
0xc00c Clear response
0xc00d Interrupt request
0xc00f Reset request
0xc010 Reset response
0x8004 Establish request
0xc005 Disconnect request
Clear request by upper
Flow control (connected)
Reset request by peer
Reset request by upper
Timer recovery
FRMR condition
Error Messages