Motorola MOSCAD 68P02958C00-B User Manual page 159

Downloader
If for any reason you need to abort the download, press the Abort icon in the toolbar at the top
of the window.
After successful completion of the download, the following message appears: Download
finished successfully.
If a new system is to be downloaded, follow the process Downloading system software
described below.
Dialog box parameters and functions
Download button
Starts the process of downloading files. The progress of the download will be documented in
the download window, placed by default at the bottom left corner of the screen. A transcript
of the download will be saved in the Log File defined for the Download Session. While the
Downloader tool is communicating with the IP Gateway, the icon at the top right
hand corner of the Downloader window will be animated.
Abort button
Aborts the downloading process. The failure of the download will be documented in the
download window at the bottom left corner of the screen.
Downloader Sessions
Session n
The session number. By default, the Downloader begins with Session 1 and then increments
the session number for each successive downloader session defined. Several sessions can be
defined in one download setting file. Double-clicking on any entry in this row acts as a toggle
to open/close the parameters for that session. The name of the session can be changed by
selecting the session (left click) and pressing Enter, or by right-clicking on the name and
selecting Rename Session, or using Edit ->Rename Session. When the name has been edited,
press Enter again to save it.
Site ID: Local
If you plan to download to the locally connected IP Gateway, Local must be selected. The
default value is Local. To download to a remotely connected IP Gateway, click on the word
Local and enter a Site ID when the cell becomes editable. Then click on the last cell of the
row and select a Link ID. If a blank Link ID is selected, the Site ID will revert to Local.
Link ID:
To download to a remotely connected IP Gateway, click on the cell and select a Link ID.
Make sure that the appropriate Site ID was selected.
5-102