Table of Contents
Advertisement
Error #770:
Device TOSCADA, Function %% Port Name %% : Cannot find site index and
port.
There is a problem in PLC table or site table definition.
Error #771:
Device TOSCADA, Function %% Port Name %% : Not enough memory for the
application.
Memory problem. Consult product group.
Error #772:
Device TOSCADA, Function %% Port Name %% : flashapp_get_block() has
failed !!
May indicate system software problem. Consult product group.
Error #773:
Device TOSCADA, Function %% Port Name %% : flashapp_cur_burn() has
failed !!
May indicate system software problem. Consult product group.
Error #774:
Device TOSCADA, Function %% Port Name %% :
Not found the loaded software for the port. This port is not operational.
PLC port connected to master is not operational. Consult product group.
Error #775:
Device TOSCADA, Function %% Port Name %%
The download of software for the port failed.
Download of software for third party protocol has failed.
Error #776:
Device TOSCADA, Function %% Port Name %%
Received a reply frame from the SWITCHER while there is no software loaded
for the port.
The received frame (reply) has been freed. No software loaded for third party
protocol port.
Error #820:
Userrom Plc module, Function %%
Control Format Error !
Communication protocol format error. May indicate system software problem.
Consult product group.
Error #821:
Userrom Plc module, Function %%
Pushbyte To fbuf Failed !
May indicate system software problem. Consult product group.
Error #822:
Userrom Plc module, Function %%
Pusblock To fbuf Failed !
May indicate system software problem. Consult product group.
C-152
Error Messages
- Quick Links:
- Table of Contents
- Introduction
- Moscad Rtu
Hide quick links:
Advertisement
Table of Contents
