Motorola MOSCAD 68P02958C00-B User Manual page 294

## 17 LEVEL = 1
This is the applications table that uses the mini-session API for communication purposes. For each
application this table records the key for the instance of the mini-session, and the application ID.
## 18 LEVEL = 2
Transport Key
-------------
This table defines the logical channels located above the Presentation layer, and capable of initiating
communications. For each channel the table records the call destination. The destination address
consists of the site ID, the port ID, and the link ID.
## 19 LEVEL = 3
Transport Key
-------------
This table defines the active logical channels that can react to communications from ToolBox, the control
center, MCP-M, or MCP-T. For each logical channel, the table records information about the SRC that
initiated the call, namely, the site ID, link ID, Port ID and the identification number of the logical channel
that was used for the call.
## 20 LEVEL = 4
The Frame Seq Key field holds the key of the application that should receive the frames originating from
the corresponding application on the transmitting side, specified in the Application ID field.
## 21 LEVEL = 5
Exp Send L_dup
The expected sequence number.
Exp
The sequence number of the next frame sent.
Send
The last sequence number that can be accepted as the sequence of a duplicated frame.
L_dup
The status registered in the internal status engine.
State
Minisession Channels
--------------------
Minisession Key
---------------
Master Channels
-------------------
Slave: Site
----
Slave Channels
--------------
Master: Site
----
Frame Sequence Channels
-----------------------
Frame Seq Key
-------------
State T_reset
Application ID
-----------------
Port Link
---- ----
Port Link
---- ----
Application Id
--------------
T_dup T_hole
C-2
Software Diagnostics Output
Channel Id
----------
B_reset B_ack