Timers (10; Rs485 - Motorola MOSCAD 68P02958C00-B User Manual

TIMERS (10__MS , 100_MS , 1__SEC , 1__MIN)
## 380 LEVEL = 0
# of entries in the service table (actual)
Maximum # of entries in the service table
# of time units passed from last task running
The limit # of time units passed without activating task : %% 4
1. The number of timer services (in the specific Instance) currently in use.
2. The maximum number of timer services that can be used.
3. The number of time units (depending on the timer resolution) that have elapsed since the last
execution.
4. The maximum number of time units that will elapse without activating the instance, until an error
message reports instance timer delay.

RS485

## 520
Rs485 hardware/software last status :-
Internal software data (key)
Internal hardware registers
Internal hardware parameters
Current channel port
Channel status mode
Channel driver lock
Channel signals
Channel access type
Channel driver type
Channel control register
Channel direction register
Channel data register
Current reception empty buffers
Current reception ready buffers
Current transmission ready buffers
Current transmission empty buffers
1. Device-key address.
2. H-W registers address.
3. H-W parameters address.
4. Port number.
5. Configuration mode.
6. Channel access semaphore.
7. MTE signal on events that took place.
(DATA) : %% 1
(IREG) : %% 2
(IRAM) : %% 3
(CHAN_PORT) : %% 4
(CHAN_MODE) : %% 5
(CHAN_LOCK) : %% 6
(CHAN_SIGNAL): %% 7
(CHAN_ACCESS): %%
(CHAN_TYPE) : %% 8
(PBCNT) : %% 9
(PBDDR) : %% 10
(PBDAT) : %% 11
: %% 12
: %% 13
: %% 14
: %% 15
C-55
Software Diagnostics Output
: %% 1
: %% 2
: %% 3