Motorola MOSCAD 68P02958C00-B User Manual page 87

Printout format buffer size (Bytes) <256-1024>
Length of buffer for debug sprint (C++ function)
Port Type for DataTAC Port 1
Currently the only option for DataTAC Port 1 is:
DataTAC
User Parameters for DataTAC Port 1
A description of the User parameters follows.
Link name
The logical name of the link that the port is connected to. The link name is automatically
selected according to the port type parameters. If relevant, you can open the drop-down list
and select another name.
RNC IP address
IP Address of the RNC box. Default: 000.000.000.001-255.255.255.254
Group ID <0xEF000000-0xEFFFFFFF>
No. of retries to declare RNC failure <0-8>
Default routing
See Default Routing under User Parameters for Port 2 for the choices.
Physical Parameters for DataTAC Port 1
Idle interval between RX frames and end reception <200-3000>
The interval of time after RX frames have been received to wait for an end frame.
Interval to wait for a frame to be received <5000-10000>
The interval of time to wait for a frame.
Link Layer Parameters for DataTAC Port 1
This section reviews the parameters through which you can control the functioning of the Link
Layer.
Link type
Not supported yet. Select the Standard link type to establish a link that requires ACKs.
Otherwise select Fast Link (no ACK).
5-30
Site Configuration
[524]
[0xEF (11111)]
[2]
[200]
[8000]
[Standard]: