Unpacking - Datalogic Magellan 9500 Product Reference Manual

Unpacking

NOTE
Product Reference Guide
The following text describes each of these steps.
To unpack the unit:
• Inspect the package for signs of damage that may have occurred dur-
ing shipping. If damage is found, report it to your carrier immedi-
ately.
• Lift out the accessory box containing the AC/DC Power Supply,
optional Remote Scale Display and cable (if present), and the Quick
Reference Guide.
• Remove the Quick Reference Guide and familiarize yourself with
the unit's controls and features. Leave the guide at the checkstand
when the installation is complete.
• Remove the protective packing and carefully lift the unit from the
carton. Be sure to save the box and all packing material. In the event
of failure, the unit must be returned to the factory in its original
packaging
.
• Carefully lift off the All Weighs™ Platter as shown in
and remove the protective foam pieces securing the weigh mecha-
nism. Set the platter back in place.
For added protection during shipment, the All Weighs™ Platter is covered
with a tight-fitting layer of vinyl as shown in
MUST BE REMOVED before placing the unit into service.
Installation Overview
Figure 2-22
Figure 2-10. This vinyl layer
2-19