Code 128 Length Control - Datalogic Magellan 9500 Product Reference Manual

With smartsentry

Table of Contents

Code 128 Length Control

Product Reference Guide

This feature specifies whether variable-length or fixed-length decoding

will be set for Code 128.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

If variable-length control was selected, you must now set the features Code

128 Maximum Label Length and Code 128 Minimum Label Length. If

fixed-length control was selected, you must now set Code 128 Fixed Length

1 and Code 128 Fixed Length 2.

CODE 128 LENGTH CONTROL = VARIABLE-LENGTH

CODE 128 LENGTH CONTROL = FIXED-LENGTH

Code 128 Enable

Show Quick Links

Table of Contents