Component Enable - Datalogic Magellan 9500 Product Reference Manual

RSS-14 2D Component Enable
6-178
When this feature is enabled, and the software reads an RSS-14 bar code
that has a 2D component associated with it, the RSS-14 bar code will not
be reported to the terminal.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
RSS-14 2D COMPONENT = DISABLE
RSS-14 2D COMPONENT = ENABLE
®
Magellan 9500