Pharmacode 39 Start Stop Character Transmission - Datalogic Magellan 9500 Product Reference Manual

Pharmacode 39 Start Stop Character Transmission

NOTE
Product Reference Guide
Enables/ disables transmission of start and stop characters for Pharmacode
39.
This item is ignored when the advanced feature, Full Label Edit, is enabled.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
PHARMACODE 39 START STOP CHARACTER TRANSMISSION = DISABLE
PHARMACODE 39 START STOP CHARACTER TRANSMISSION = ENABLE
Pharmacode 39 Enable
6-205