MSI/Plessey Fixed Length 1
NOTE
6-266
This feature specifies MSI/Plessey first fixed length.
This applies when MSI/Plessey Length Control is set to fixed-length decod-
ing.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
You'll need to cover any unused bar codes on this and the facing
page to ensure that the scanner reads only the bar code you intend
to scan.
3. Scan the appropriate digits from the keypad in Appendix C that rep-
resent the desired fixed label length. The selectable range for this
option is 4 to 16. Pad all single digit numbers with a leading zero to
yield a two-digit entry (04-16).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET MSI/PLESSEY FIXED LENGTH 1
SET MSI/PLESSEY FIXED LENGTH 1
below.
®
Magellan
9500