Code 39 Fixed Length 2 - Datalogic Magellan 9500 Product Reference Manual

Code 39 Fixed Length 2

NOTE
6-202
This feature specifies Code 39 second fixed length.
This applies when Code 39 Length Control is set to fixed-length decoding.
If Fixed Length 2 is set to 00, then Fixed Length 1 will apply
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
need to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C that rep-
resent the desired fixed label length. The selectable range for this
option is 00, no second fixed length, or 01 to 50. Pad all single digit
numbers with a leading zero to yield a two-digit entry (00-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET CODE 39 FIXED LENGTH 2
SET CODE 39 FIXED LENGTH 2
below. You'll
®
Magellan 9500