Eas Retry Count - Datalogic Magellan 9500 Product Reference Manual

EAS Retry Count

NOTE
6-52
This feature sets the number of times the deactivation sequence (defined
by the feature, "EAS Deactivation Duration — Retry ") is restarted after a
failed deactivation attempt.
To set the EAS Retry Count:
1. Scan the SWITCH bar code.
2. Scan the bar code,
cover any unused bar codes on this and the facing page to ensure
that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C that rep-
resent the desired number. The selectable range is 0-15 resets. Pad
all single and double digit numbers with leading zeroes to yield a
two-digit entry (00-15).
A setting of zero specifies no deactivation retries upon failed deactivation
attempt.
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET EAS RETRY COUNT
SET EAS RETRY COUNT
below. You'll need to
®
Magellan 9500