Set-Up - Datalogic Magellan 9500 Product Reference Manual

Set-up

Figure 2-20. EAS Controller Box Connections
2-36
1. Place the scanner on the checkstand next to the counter cutout.
2. Make all connections to peripheral devices, such as the Remote
Scale Display (see
). Power on the EAS Controller Box.
Figure 2-20
ON/OFF
Switch
3. Route the cables up through the cutout and connect the scanner and
scale interface cable(s), EAS cable and Remote Scale Display cable
(optional) to the scanner. Some POS terminals require two interface
cables; one for the scanner interface and one for the scale interface.
Refer to
Figure 2-21
If you have a scanner with no scale, there will be only one interface cable
to the POS terminal.
4. Connect the power cord to the scanner and route the other end
down through the checkstand to the AC power outlet. DO NOT
plug the power cord in at this time.
) and EAS Controller Box (see
Figure 2-15
To Power
To Scanner
for cable connection locations.
To EAS
Antenna
®
Magellan 9500