Msi/Plessey Fixed Length 2 - Datalogic Magellan 9500 Product Reference Manual

MSI/Plessey Fixed Length 2

NOTE
Product Reference Guide
This feature specifies MSI/Plessey second fixed length.
This applies when MSI/Plessey Length Control is set to fixed-length decod-
ing.
If Fixed Length 2 is set to 00 (zero), then Fixed Length 1 will apply.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
You'll need to cover any unused bar codes on this and the facing
page to ensure that the scanner reads only the bar code you intend
to scan.
3. Scan the appropriate digits from the keypad in Appendix C that rep-
resent the desired fixed label length. The selectable range for this
option is 0 (zero), or 4 to 16. Pad all single digit numbers with a
leading zero to yield a two-digit entry (00, 04-16).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET MSI/PLESSEY FIXED LENGTH 2
SET MSI/PLESSEY FIXED LENGTH 2
MSI/Plessey Enable
below.
6-267