Standard 2 Of 5 Length Control - Datalogic Magellan 9500 Product Reference Manual

Standard 2 of 5 Length Control

NOTE
6-274
This feature specifies whether variable-length or fixed-length decoding
will be set for
Standard
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
If variable-length control was selected, you must now set the features
Standard 2 of 5 Maximum Label Length and Standard 2 of 5 Mini-
mum Label Length. If fixed-length control was selected, you must now
set Standard 2 of 5 Fixed Length 1 and Standard 2 of 5 Fixed Length
2.
STANDARD 2 OF 5 LENGTH CONTROL = VARIABLE-LENGTH
STANDARD 2 OF 5 LENGTH CONTROL = FIXED-LENGTH
2 of 5.
®
Magellan 9500