Remote Display - Enable/Disable - Datalogic Magellan 9500 Product Reference Manual

Remote Display — Enable/Disable
NOTE
Product Reference Guide
The scanner-scale can be configured to operate with or without a Remote
Display.
Recalibration/recertification may be required when adding a Remote Display.
Consult your local Weights and Measures authority.
If this feature is enabled the scanner-scale will expect that it is connected to
a Remote Display, and will indicate an error if one is not. See Error Codes in
Chapter 4 for more information.
General Scanner and Scale Features
REMOTE DISPLAY = DISABLE
REMOTE DISPLAY = ENABLE
6-43