Code 128 Aim Id - Datalogic Magellan 9500 Product Reference Manual

Code 128 AIM ID

Product Reference Guide
This feature enables/disables transmission of the Code 128 AIM symbol-
ogy identifier.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODE 128 AIM ID = DISABLE
CODE 128 AIM ID = ENABLE
Code 128 Enable
6-211