Codabar Check Character Transmission - Datalogic Magellan 9500 Product Reference Manual

Codabar Check Character Transmission

NOTE
Product Reference Guide
Enables/disables transmission of an optional Codabar check character.
Applies only when Codabar Check Character Calculation is enabled. This
item is ignored when the advanced feature, Full Label Edit, is enabled.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODABAR CHECK CHARACTER TRANSMISSION = DISABLE
CODABAR CHECK CHARACTER TRANSMISSION = ENABLE
Codabar Enable
6-239