Interface Related Features; Interface Type - Datalogic Magellan 9500 Product Reference Manual

Interface Related Features

Interface Type

NOTE
NOTE
Product Reference Guide
Specifies the current scanner interface. Selections are:
INTERFACE TYPE
RS-232 Standard
RS-232 Wincor-Nixdorf
RS-232 Single Cable
IBM USB
Port 17
IBM
Null Interface
a. To access a scanner's interface identification number, place the
scanner in Scanner Diagnostic Mode and view the 7-segment FRU
display (reference
more information).
A new scanner may have been shipped from the factory with a Null Interface
(no interface type selected) to ensure system compatibility at installation. In
this case, the correct Interface Type programming bar code must be scanned
first before the scanner can be used with a POS system.
If the scanner's interface type must be changed, always be sure that interface
configuration is the FIRST item scanned during a programming session.
(Selecting an interface type resets ALL other configuration items to the fac-
tory default for that interface type.)
INTERFACE IDENTIFICATION NUMBER
NOT USER-SELECTABLE
Indicated by 7-segment FRU display flashing
0 at start-up
Scanner Diagnostic Mode
Interface Related Features
a
05
12
20
45
04
in Chapter 2 for
6-59