Eas Features; Eas Mode - Datalogic Magellan 9500 Product Reference Manual

EAS Features

EAS Mode

NOTE
6-48
This controls the mode of operation for interfacing with the Sensor-
®
TM
matic ScanMax Pro
• Disabled = EAS deactivation turned off.
• Coupled Mode = EAS tag is deactivated only upon successful scan-
ning of an item's barcode or via manual push button.
• Decoupled Mode = EAS deactivation is performed independently of
barcode scanning.
• Hybrid Mode = EAS system is armed whenever the scanner is
enabled and the deactivation beep is sounded when an EAS tag is
deactivated.
Deactivation can only be initiated manually if the manual EAS deactivation
push button is armed to do so. Reference the feature, Manual EAS Deactiva-
tion Push Button for more information.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAS device. Choices are:
®
Magellan 9500