Standard 2 of 5 Fixed Length 1
NOTE
Product Reference Guide
This feature specifies Standard 2 of 5 first fixed length.
This applies when Standard 2 of 5 Length Control is set to fixed-
length decoding.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
below. You'll need to cover any unused bar codes on this and the fac-
ing page to ensure that the scanner reads only the bar code you
intend to scan.
3. Scan the appropriate digits from the keypad in
represent the desired fixed label length. The selectable range for this
option is 1 to 50. Pad all single digit numbers with a leading zero to
yield a two-digit entry (01-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET STANDARD 2 OF 5 FIXED LENGTH 1
SET STANDARD 2 OF 5 FIXED LENGTH 1
Standard 2 of 5 Enable
that
Appendix C
6-277