Codabar Fixed Length 1 - Datalogic Magellan 9500 Product Reference Manual

Codabar Fixed Length 1

NOTE
Product Reference Guide
This feature specifies Codabar first fixed length.
Length in this case includes start, stop or check and data characters, but
does not include full ASCII shift characters.
This feature applies when Codabar Length Control is set to fixed-length
decoding.
Decodable length is four when the optional check character is present.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code,
need to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the keypad in Appendix C that rep-
resent the desired fixed label length. The selectable range for this
option is 03 to 50. Pad all single digit numbers with a leading zero
to yield a two-digit entry (03-50).
4. Complete the programming sequence by scanning the SWITCH
bar code.
SET CODABAR FIXED LENGTH 1
SET CODABAR FIXED LENGTH 1
Codabar Enable
below. You'll
6-245