Green Led Idle State - Datalogic Magellan 9500 Product Reference Manual

Green LED Idle State

Product Reference Guide
This feature specifies the state of the green scanner LED when the scanner
is idle and ready to read a label. Options are:
• Off
• On dim
To set the LED Idle State:
1. Scan your selection from the bar codes below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
2. Complete the programming sequence by scanning the SWITCH
bar code.
GREEN LED IDLE STATE = ON DIM
General Scanner and Scale Features
GREEN LED IDLE STATE = OFF
6-19