Scale Error Reporting - Datalogic Magellan 9500 Product Reference Manual

Scale Error Reporting

Remote Scale Status
Display Lamp
Flash, pause, 1 blink,
E _1 long pause, repeat
sequence.
Flash, pause, 2
E__2 blinks, long pause,
repeat sequence.
Product Reference Guide
Figure 4-1. 7-Segment LED Display
Scale diagnostics uses the Remote Scale Display and the Zero Status lamp
to communicate specific scale failures. The following chart shows the
Remote Display messages, the Scale Status lamp indication, the problem
that the scale is experiencing and what action should be taken. When
troubleshooting, always remember to check all cable connections first
before proceeding with other problem isolation steps.
Problem
Description
Too much motion at power-
up.
Calibration lost.
Scale Error Reporting
7-Segment Display
Action Required
Check for stable installation. Change
scale motion filter using the labels
found in Chapter 6; restart. If prob-
lem persists, scale may require calibra-
tion.
Call technical support personnel. Re-
calibrate; restart; recertify (if required).
4-5