First Character Transmission - Datalogic Magellan 9500 Product Reference Manual

EAN-13 First Character Transmission
NOTE
6-140
Enables/disables transmission of EAN/JAN-13 first character.
This item is ignored when the advanced feature, Full Label Edit, is enabled.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN-13 FIRST CHARACTER TRANSMISSION = DISABLE
EAN-13 FIRST CHARACTER TRANSMISSION = ENABLE
®
Magellan 9500