Code 93 Enable - Datalogic Magellan 9500 Product Reference Manual

With smartsentry

Table of Contents

Code 93 Enable

Enables/disables the ability of the scanner to decode Code 93 labels.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

CODE 93 = DISABLE

CODE 93 = ENABLE

Show Quick Links

Table of Contents